Why does my spa water pump have to be removed?

Why does my spa water pump have to be removed?

Pump may have to be removed for access to suction end. My spa is overheating. Your spa’s water passes through the filter before it moves on to the heater. If water flow is restricted by a dirty filter or debris in the Filter Housing, the heater may not operate.

How does a pool pump trip the breaker?

I turned off the pump via the timer switch, flipped the breaker off and back on, and then turned the pump back on (again, via the timer switch). The pump revved up as it normally does, for literally one second, and then the breaker tripped again. I repeated this several times, with the same result.

What should I do if my spa jets are not working?

Open this valve and there should be the sound of hissing air: keep open until water starts to come out, then close the valve. Force water directly into your spa’s jets with a garden hose, holding the hose directly but gently up against each jet for 20-30 seconds.

Can you leave a pool pump off in the summer?

If it’s not summer, you can probably just leave the pump off for a day and try again once everything has had a chance to dry. In the summertime, you can still get by with your pump not running for one or two days but it will require some extra chlorine (shock) and manual circulation with a pole or paddle a couple of times per day.

What to do if your spa breaker trip?

Test for pump 1 or circulation pump and heater Turn spa power OFF at the breaker and unplug all the accessories and pumps with the exception of pump one or the circulation pump. Turn spa power ON at the breaker and press the temp button. Either pump 1 will operate at low speed or the circulation pump will come on. Did the breaker trip?

Can a single speed pump trip a breaker?

Yes Replace the component that make the breaker to trip. No On some occasions, the breaker trips after 12 hours, so unplug all the accessories and extra pumps. Keep pump 1 and the heater connected and run for at least 24 hours. Continue testing components one at a time while running the spa until the breaker trips. Title New single speed pump

Is there a pump that has only one speed?

This pump is a 3 hp jet pump that is only a single speed, which normally means there’s another pump somewhere else that runs the water through the heating element, I’ve never seen a spa that only has one speed, and with that pump, the only speed would be high speed all the time.

What kind of pump do I need for my hottub?

S-Class, Heater model # SC-CF-P122-02-L3-H5.5-H, Pump – 14 FLA, Ozone 3A, Light 12 VAC1A, Heater 23A, Pump – Flomaster XP2, Model # – T55MWCBB-1185, Volts 230 Hope this helps okay, that’s an aquaflo flowmaster pump, should be two speed, if you hit the jets button, will the pump run on high speed, or still the same problem?

Why does my hot tub pump not start?

After replacing the start capacitor, the motor started and is running. It turns out that Spa/hot rub AC motors like this have both a start and run capacitor, as do blowers on forced air furnaces and air conditioning units. If an AC motor like this won’t start, there’s a good chance it’s the start capacitor.

How often should I get my 2 hour filter cycle?

By default you should still get your 2 hour filter cycle twice a day and temp default is (I believe) 100 degrees. …which only leaves the PC board. Even if something were wrong with the motor the pc board is what’s sending it power.

Where is the pressure release valve on a spa?

Fortunately, once this air is released from the system, everything should work properly. If your spa’s Filter is in a sealed Filter Housing, there should be a small black pressure release valve directly on top of the housing.

When is a spa pump is an emergency?

Spa pumps need to operate every day to maintain clean and hot spa water – so when your hot tub pump has problems, it’s an emergency. If your spa cover is kept on, you may have 1 day before it cools off and perhaps only a few days before bacteria and pathogens begin to thrive.

When does a hot tub pump have a problem?

And when the spa pump ain’t happy, ain’t nobody happy – that’s because without water flow, there is no filtration, no sanitation and no heating. Spa pumps need to operate every day to maintain clean and hot spa water – so when your hot tub pump has problems, it’s an emergency.

Why does the spa pump need to be on high?

They provide the circulation for the spa filter and heater and give an extra boost when turning the spa jets on high. And when the spa pump ain’t happy, ain’t nobody happy – that’s because without water flow, there is no filtration, no sanitation and no heating.

What kind of pump does a hot tub have?

Spas and hot tubs with one pump usually have a 2-speed motor, operating on low speed most of the time, and on high speed when using the tub with the jets. Here’s a simple way to troubleshoot your spa or hot tub pump. Hot Tub Blogs should do this more often – These are our most Frequently Asked Questions about spa pump repair.

What to do when your hot tub wont turn on?

Place the water hose down the main filter in the filter compartment, and fill the spa completely to push the air lock out Press the Jets button on the dock unit; if it’s necessary to reset the panel, press and hold the touchscreen in any blank area until it turns black

Why is there water loss in my spa?

My spa’s pump seems to be surging. Keeping your spa’s water at it’s proper level is important. Generally, a spa’s water level should be about halfway up the filter opening. Add water as needed. Water loss can be due to leaks, but a certain amount of evaporation is also unavoidable.

Why does the spa drain when the pump shuts off?

A raised body of water that actually shares the same system as the main pool that is lower than the spa naturally wants to drain into the main body of water below it because of gravity. The check valve prevents back water flow from going into the pool.

Is there a leak in my spa pump?

There is no actual leak. Essentially, it is just moving. Depending on the model of your check valve, you may be able to replace the main part of it, or you may actually have to replace the entire valve. You may also have smaller check valves that are actually in your return lines that bring water back to the spa.

What to do if the main pump is off in Sundance spa?

If debris is present, remove debris, install switch and test system. If condition still exist, replace switch.) if switch measures infinite (no continuity) with pump off, switch is OK, Turn on Main pump and measure across switch terminals for continuity. If continuity is measured, switch is OK.

Is it OK to replace a hot tub pump?

If you are replacing an existing spa pump, you can replace it with the same or similar horsepower as your existing pump, if you are happy with current forcefullness of the water coming out of your jets.

How long does a spa circ pump last?

Spa circulation pumps are low flow, single speed pumps that run 24 hrs to keep your water filtered and heated. They run all the time, but are low energy use, drawing between 0.5 and 1.5 amps. Running all the time does accelerate wear and tear, and makes the average circ pump lifespan about 7-9 years.

How do you replace a circ pump in a hot tub?

The circ pump is also likely screwed into the base of the equipment bay, remove the screws in the pump base, and set aside to use later on the new pump. Since there commonly are no cut-off valves on either side of a low flow circ pump, if your spa is full of water you will spill some water while installing a new circ pump.

What do you call a check valve in a spa?

Depending on the model of your check valve, you may be able to replace the main part of it, or you may actually have to replace the entire valve. You may also have smaller check valves that are actually in your return lines that bring water back to the spa. These are called return line check valves.

Why is the circ pump on my Sunrise spa not working?

If the circ pump is not operating it could produce the FLO message. A locked up pump could also cause the GFCI breaker to trip. The pump motor could need a new start capacitor or the motor itself could be on the way out. If all else fails contact your local Spa Service Support Desk to book a Diagnostic and Repair of your Sunrise Spa.